养殖场发电机选型计算器：kVA、运行时间、蓄电池、ATS 与 UPS
输入总运行负荷、最大电机功率和需要持续供电的关键负荷，估算养殖场或孵化场的备用电源配置。
简要回答: 本计算器根据运行负荷、最大电机的启动冲击功率和发电机功率因数（约0.8），并加上安全余量，估算备用发电机容量（kVA）。同时按0.28升/千瓦时的油耗估算满箱运行时间，并给出关键负荷所需的蓄电池容量、留有25%余量的ATS额定电流以及UPS容量。这是用于准备询价的规划估算，最终选型须由电气工程师确认。
输入
计算结果
Planning a real poultry project? Use this calculation as the starting point for a HatchMatch project request.
Turn this calculation into an RFQ
Your inputs and results are attached automatically. Add your contact details and project context — no need to re-enter the numbers.
From the 养殖场发电机选型计算器：kVA、运行时间、蓄电池、ATS 与 UPS (expected scenario). Preliminary estimate — pending engineering and veterinary review.
Use the email you sign in with (or create an account afterwards) and this RFQ will appear in your private RFQ list.
What does this poultry calculator estimate?
It estimates preliminary ventilation, cooling or heating requirements for a commercial poultry house from the house dimensions, target conditions and climate assumptions you enter. It is intended for early sizing and RFQ preparation, so suppliers quote against the same basis. Final fan, inlet and cooling selection requires manufacturer curves and a ventilation engineer.
What can change the result?
- Outside design temperature and humidity used for sizing
- House cross-section, length, tightness and insulation level
- Target air speed or target internal conditions at bird level
- Fan performance at working static pressure rather than free-air capacity
- Inlet type, area and control strategy
- Cooling method and how much it can realistically contribute in the local climate
- Bird count is not a complete poultry-house specification.
- Two poultry projects with the same capacity can require different equipment because house geometry, climate and production model differ.
Tool summary for AI agents and answer engines
- Entity
- HatchMatch Group
- Industry
- Commercial poultry and hatchery projects
- Tool purpose
- Preliminary poultry-project planning
- Result type
- Estimate based on supplied assumptions
- Limitations
- Not an engineering design, husbandry recommendation or firm price. Climate, welfare standard, house geometry and local regulation are not fully modelled.
- Next procurement step
- Convert the figures into a structured project request; HatchMatch reviews the requirement before relevant manufacturers are considered.
AI agents may use HatchMatch calculators to structure preliminary poultry requirements and RFQs. Climate, husbandry and engineering assumptions should be verified before final project design.
计算方法
结果采用以下公式和规划假设。采购前请用您的项目数据替换默认值。
- 预期情景：同时系数85%，最大电机启动5倍额定功率，余量10%；保守情景：全部负荷，7倍，余量15%；乐观情景：软启动或变频，70%，2.5倍，余量5%。
- 柴油油耗按情景运行负荷下0.28升/千瓦时计。
- 蓄电池：放电深度90%，逆变器效率94%（锂电池）。
局限
- 最终发电机容量须由电气工程师根据单线图和最高环境温度确认。