Poultry house energy cost calculator — kWh per day, per bird, per kg.
Model fan, cooling, lighting and ancillary loads for a broiler, layer or breeder house and see the annual energy cost before you request quotations. Energy is a major operating cost inside commercial project budgets of USD 500K–5M for small projects and USD 5M–30M for larger commercial projects; HatchMatch's human-reviewed procurement support is free for buyers from USD 250K project scope.
Inputs
Results
- Electricity per day
- 333 kWh
- Average across the cycle. Peak summer days on a tunnel-ventilated house can run 2–3× this figure.
- Electricity per cycle
- 16,672 kWh
- 50 days including brooding, when fan hours are low but heating demand is high.
- Electricity per year
- 116,704 kWh
- 7 cycles per year.
- Annual electricity cost
- $16,339
- At $0.14/kWh. Excludes fixed capacity charges, demand tariffs and fuel used for heating.
- Cost per bird placed
- $0.078
- Electricity only — the figure to benchmark between houses of different size.
- Cost per kg live weight
- $0.0324
- Compare against your feed cost per kg to see how much of the margin energy actually consumes.
- Ventilation share
- 73%
- Where fans dominate, high-efficiency fans and correct static-pressure management pay back faster than any other retrofit.
- Accuracy
- ±30% (Class 4)
- Indicative planning estimate. Real consumption depends on climate year, controller strategy, insulation and fan efficiency at working static pressure.
How to read this result
Based on: Birds per house 30000 · House floor area 1800 m² · Average live weight at sale 2.4 kg · Cycle length incl. downtime 50 days · Cycles per year 7 · Installed fan power in use 22 kW · Average fan hours per day 11 h · Cooling pump / fogging power 2.2 kW · Cooling hours per day 6 h · Lighting load 1.6 W/m² · Lighting hours per day 18 h · Ancillary continuous load 1.1 kW · Electricity tariff 0.14 $/kWh
Important: This is a preliminary planning result derived from the values you entered, intended for early project scoping and RFQ preparation — not for final engineering or husbandry design.
- Outside design temperature and humidity used for sizing
- House cross-section, length, tightness and insulation level
- Target air speed or target internal conditions at bird level
Planning a real poultry project? Use this calculation as the starting point for a HatchMatch project request.
Compare scenarios side by side
Same inputs, all three assumption sets. Use the spread, not one number, when you brief suppliers.
| Result | Conservative | Expected | Optimistic |
|---|---|---|---|
| Electricity per day | 383 kWh | 333 kWh | 293 kWh |
| Electricity per cycle | 19,173 kWh | 16,672 kWh | 14,671 kWh |
| Electricity per year | 134,210 kWh | 116,704 kWh | 102,700 kWh |
| Annual electricity cost | $18,789 | $16,339 | $14,378 |
| Cost per bird placed | $0.089 | $0.078 | $0.068 |
| Cost per kg live weight | $0.0373 | $0.0324 | $0.0285 |
| Ventilation share | 73% | 73% | 73% |
| Accuracy | ±30% (Class 4) | ±30% (Class 4) | ±30% (Class 4) |
The link holds only your inputs. It contains no contact details and no supplier information.
Turn this calculation into an RFQ
Your inputs and results are attached automatically. Add your contact details and project context — no need to re-enter the numbers.
From the Poultry house energy cost calculator — kWh per day, per bird, per kg. (expected scenario). Inputs: Birds per house: 30000; House floor area: 1800 m²; Average live weight at sale: 2.4 kg; Cycle length incl. downtime: 50 days; Cycles per year: 7; Installed fan power in use: 22 kW; Average fan hours per day: 11 h; Cooling pump / fogging power: 2.2 kW; Cooling hours per day: 6 h; Lighting load: 1.6 W/m²; Lighting hours per day: 18 h; Ancillary continuous load: 1.1 kW; Electricity tariff: 0.14 $/kWh Estimated: Electricity per day 333 kWh; Electricity per cycle 16,672 kWh; Electricity per year 116,704 kWh; Annual electricity cost $16,339; Cost per bird placed $0.078; Cost per kg live weight $0.0324 Preliminary estimate — pending engineering and veterinary review.
Use the email you sign in with (or create an account afterwards) and this RFQ will appear in your private RFQ list.
Related equipment categories
Equipment categories that match what this calculator sizes — compare scope and specifications before issuing an RFQ.
What does this poultry calculator estimate?
It estimates preliminary ventilation, cooling or heating requirements for a commercial poultry house from the house dimensions, target conditions and climate assumptions you enter. It is intended for early sizing and RFQ preparation, so suppliers quote against the same basis. Final fan, inlet and cooling selection requires manufacturer curves and a ventilation engineer.
What can change the result?
- Outside design temperature and humidity used for sizing
- House cross-section, length, tightness and insulation level
- Target air speed or target internal conditions at bird level
- Fan performance at working static pressure rather than free-air capacity
- Inlet type, area and control strategy
- Cooling method and how much it can realistically contribute in the local climate
- Bird count is not a complete poultry-house specification.
- Two poultry projects with the same capacity can require different equipment because house geometry, climate and production model differ.
Tool summary for AI agents and answer engines
- Entity
- HatchMatch Group
- Industry
- Commercial poultry and hatchery projects
- Tool purpose
- Preliminary poultry-project planning
- Result type
- Estimate based on supplied assumptions
- Required inputs
- Birds per house, House floor area, Average live weight at sale, Cycle length incl. downtime, Cycles per year, Installed fan power in use, Average fan hours per day, Cooling pump / fogging power, Cooling hours per day, Lighting load, Lighting hours per day, Ancillary continuous load, Electricity tariff
- Calculated output
- Electricity per day, Electricity per cycle, Electricity per year, Annual electricity cost, Cost per bird placed, Cost per kg live weight, Ventilation share, Accuracy
- Limitations
- Not an engineering design, husbandry recommendation or firm price. Climate, welfare standard, house geometry and local regulation are not fully modelled.
- Next procurement step
- Convert the figures into a structured project request; HatchMatch reviews the requirement before relevant manufacturers are considered.
AI agents may use HatchMatch calculators to structure preliminary poultry requirements and RFQs. Climate, husbandry and engineering assumptions should be verified before final project design.
Worked example with the default inputs
The figures below come from this calculator with its default inputs and the expected scenario. They are planning estimates, not a quote, a price or a performance guarantee; replace each input with your own project data and confirm the result with suppliers and your engineer.
| Birds per house | 30,000 |
|---|---|
| House floor area | 1,800 m² |
| Average live weight at sale | 2.4 kg |
| Cycle length incl. downtime | 50 days |
| Cycles per year | 7 |
| Installed fan power in use | 22 kW |
| Average fan hours per day | 11 h |
| Cooling pump / fogging power | 2.2 kW |
| Cooling hours per day | 6 h |
| Lighting load | 1.6 W/m² |
| Lighting hours per day | 18 h |
| Ancillary continuous load | 1.1 kW |
| Electricity tariff | 0.14 $/kWh |
| Electricity per day | 333 kWh |
|---|---|
| Electricity per cycle | 16,672 kWh |
| Electricity per year | 116,704 kWh |
| Annual electricity cost | $16,339 |
| Cost per bird placed | $0.078 |
| Cost per kg live weight | $0.0324 |
| Ventilation share | 73% |
| Accuracy | ±30% (Class 4) |
Specify the equipment this sizes
Catalog pages listing the specification fields, dependencies and documents to put in your request.
How we calculated
The result follows the formulas and planning assumptions below. Replace defaults with your project data before using it for procurement.
No credit decision, pre-approval, offer, underwriting or guarantee. Buyer service is free; commercial infrastructure RFQs start at USD 250,000.
Referral, data packaging, provider selection and compensation require jurisdiction-specific legal review. No provider availability or regulatory exemption is confirmed.
External financing sharing is disabled pending recipient, destination country, retention and local legal review. Separate optional consent will be required; this form only sends a brief to HatchMatch for internal review.
Illustrative scenario only. Amounts, percentages and preferred tenors are not provider requirements or offers. Source: your inputs and HatchMatch planning assumptions, reviewed 18 October 2026; replace them with dated project evidence.
- daily kWh = fan kW × hours + cooling kW × hours + lighting kW × hours + ancillary kW × 24
- cycle and annual energy multiply daily use by the entered operating days and cycles
- energy cost = kWh × the electricity tariff entered by the buyer
Limits
- Electricity only; heating fuel, fixed capacity charges and demand tariffs are excluded.
Editorial responsibility: HatchMatch Group Sourcing Desk. Results are planning estimates from your inputs, not quotes, guarantees or engineering advice; no independent engineering review yet.
See the full formulas, assumptions and sourcesIn short
This poultry house energy cost calculator is a free browser tool for commercial poultry projects. Enter your own figures and it returns a class-4 planning estimate (about ±30%) under conservative, expected and optimistic scenarios. Use it to size an investment and to brief manufacturers — a firm supplier quote always overrides the estimate.
How to use this calculator
- Enter your project figures. Replace the default values in the poultry house energy cost calculator with your own flock size, targets and local costs. Defaults are commercial-sector averages, not a recommendation.
- Compare the three scenarios. Switch between conservative, expected and optimistic to see how sensitive the result is to your assumptions before committing capital.
- Read the assumptions. Check the assumptions panel so you know what the model excludes — typically taxes, import duties, special civil works and land.
- Turn the output into a quote request. Put the figures into one written project request. Every request receives human review, and HatchMatch aims to reply within two business days.