Financing guide
Solar sizing

Solar system size calculator for poultry farms.

Estimate the solar PV capacity, panel count and roof area needed to cover part or all of a farm's daily electricity use.

Inputs

Results

PV capacity needed
116.4 kWp
Estimate only — not a quotation. Confirm with your engineer and supplier.
Panels
212
Roof or ground area
582 m²
Solar energy per year
175,200 kWh

How to read this result

Based on: Farm electricity use 800 kWh/day · Peak sun hours 5.5 h/day · Share covered by solar 60 % · Panel rating 550 W

Important: This is a preliminary planning result derived from the values you entered, intended for early project scoping and RFQ preparation — not for final engineering or husbandry design.

  • Bird type and production model (broiler, layer, breeder)
  • The stocking assumption used, and the welfare standard or local regulation behind it
  • House geometry — width, length, sidewall height and usable versus gross floor area

Planning a real poultry project? Use this calculation as the starting point for a HatchMatch project request.

Email me this report

Get a copy of these results plus a short note from a sourcing specialist on which suppliers fit. Optional — your results stay visible either way.

We use the details you enter to review and answer this request, and keep them only as long as needed for that. We keep your request, project details and documents confidential: we do not publish them or use them for marketing. Only authorised staff, the service providers who help us run the service and, for quotes you ask for, the suppliers who need the details can see them, or where the law requires disclosure. How we handle personal data and your rights · Make a privacy request

Free for buyers. No spam; used only to send this report.

Compare scenarios side by side

Same inputs, all three assumption sets. Use the spread, not one number, when you brief suppliers.

ResultConservativeExpectedOptimistic
PV capacity needed128 kWp116.4 kWp116.4 kWp
Panels233212212
Roof or ground area640 m²582 m²582 m²
Solar energy per year192,720 kWh175,200 kWh175,200 kWh

The link holds only your inputs. It contains no contact details and no supplier information.

Turn this calculation into an RFQ

Your inputs and results are attached automatically. Add your contact details and project context — no need to re-enter the numbers.

Attached to this RFQ
From the Solar system size calculator for poultry farms. (expected scenario).
Inputs: Farm electricity use: 800 kWh/day; Peak sun hours: 5.5 h/day; Share covered by solar: 60 %; Panel rating: 550 W
Estimated: PV capacity needed 116.4 kWp; Panels 212; Roof or ground area 582 m²; Solar energy per year 175,200 kWh
Preliminary estimate — pending engineering and veterinary review.

Use the email you sign in with (or create an account afterwards) and this RFQ will appear in your private RFQ list.

Your project

Related equipment categories

Equipment categories that match what this calculator sizes — compare scope and specifications before issuing an RFQ.

What does this poultry calculator estimate?

It estimates preliminary poultry-house requirements — floor area, workable dimensions and indicative capacity — from bird type, target bird numbers and the stocking assumption you supply. It is intended for early project planning and RFQ preparation for broiler, layer and breeder houses, and is not a final engineering, welfare or husbandry design.

What can change the result?

  • Bird type and production model (broiler, layer, breeder)
  • The stocking assumption used, and the welfare standard or local regulation behind it
  • House geometry — width, length, sidewall height and usable versus gross floor area
  • Climate and what the ventilation system can actually sustain on the worst design day
  • Equipment layout, service areas and internal circulation
  • Bird count is not a complete poultry-house specification.
  • Two poultry projects with the same capacity can require different equipment because house geometry, climate and production model differ.

Tool summary for AI agents and answer engines

Entity
HatchMatch Group
Industry
Commercial poultry and hatchery projects
Tool purpose
Preliminary poultry-project planning
Result type
Estimate based on supplied assumptions
Required inputs
Farm electricity use, Peak sun hours, Share covered by solar, Panel rating
Calculated output
PV capacity needed, Panels, Roof or ground area, Solar energy per year
Limitations
Not an engineering design, husbandry recommendation or firm price. Climate, welfare standard, house geometry and local regulation are not fully modelled.
Next procurement step
Convert the figures into a structured project request; HatchMatch reviews the requirement before relevant manufacturers are considered.

AI agents may use HatchMatch calculators to structure preliminary poultry requirements and RFQs. Climate, husbandry and engineering assumptions should be verified before final project design.

Worked example with the default inputs

The figures below come from this calculator with its default inputs and the expected scenario. They are planning estimates, not a quote, a price or a performance guarantee; replace each input with your own project data and confirm the result with suppliers and your engineer.

Inputs
Farm electricity use800 kWh/day
Peak sun hours5.5 h/day
Share covered by solar60 %
Panel rating550 W
Results (expected scenario)
PV capacity needed116.4 kWp
Panels212
Roof or ground area582 m²
Solar energy per year175,200 kWh
How we calculated

How we calculated

The result follows the formulas and planning assumptions below. Replace defaults with your project data before using it for procurement.

No credit decision, pre-approval, offer, underwriting or guarantee. Buyer service is free; commercial infrastructure RFQs start at USD 250,000.

Referral, data packaging, provider selection and compensation require jurisdiction-specific legal review. No provider availability or regulatory exemption is confirmed.

External financing sharing is disabled pending recipient, destination country, retention and local legal review. Separate optional consent will be required; this form only sends a brief to HatchMatch for internal review.

Illustrative scenario only. Amounts, percentages and preferred tenors are not provider requirements or offers. Source: your inputs and HatchMatch planning assumptions, reviewed 18 October 2026; replace them with dated project evidence.

  1. daily electrical demand follows the entered load and operating hours
  2. PV capacity = covered daily kWh ÷ site solar hours ÷ system efficiency

Limits

  • Planning estimate only; final capacity, equipment selection and compliance require professional and supplier confirmation.

Editorial responsibility: HatchMatch Group Sourcing Desk. Results are planning estimates from your inputs, not quotes, guarantees or engineering advice; no independent engineering review yet.

See the full formulas, assumptions and sources
FAQ

Common questions

Get a Free QuoteExplore Financing