Financing guide

Flagship planning tool

Integrated poultry project calculator

Size a complete commercial project in one place — houses, feed, water, climate, power, production and supporting facilities — then request comparable turnkey quotes. All results are planning estimates based on published industry standards, not quotations.

Also needed?

Houses

Number of housesBroiler at 16 birds/m²
7
House dimensionsCommon tunnel-ventilated house size; adjust to your site
120 × 15 m
Birds per house
28,800

Feed, water & climate

Feed requirementPeak ≈ 40 t/day
4,752 t / year
Peak water3× feed by weight for a hot climate
120 m³ / day
Ventilation (max, per house)5 m³/h per kg live weight → about 9 × 50" fans per house
345,600 m³/h
Cooling pads (per house)At 1.8 m/s pad face velocity
54 m²
Feed silos2 per house, 5 days' peak feed
14 × 15 t
Standby generatorFan load + 25% other loads, 0.8 power factor, 25% margin
≈ 150 kVA

Production

Annual live weight6 cycles × 95% liveability × 2.4 kg
2,736 t

Indicative farm CAPEX (estimate)

Farm CAPEXHouses + equipment, freight, site works, owner's cost. Excludes land, permits, working capital and the supporting facilities above.
$3.94M
Planning range (±30%)
$2.76M–$5.12M
Per bird place
$19.68

Estimate only — not a quotation or engineering design. Confirm every figure with qualified engineers and supplier quotes for your site.

Ready to price this project?

Send this scope for review. We introduce independent turnkey/EPC partners so you can compare like-for-like quotes. HatchMatch never executes projects. Free for buyers.

Assumptions

  • Stocking: broilers 16 birds/m², layers 25 hens/m² floor (multi-tier), breeders 5 birds/m².
  • Feed: broilers FCR 1.65 to a 2.4 kg live weight; layers 115 g/hen/day; breeders 160 g/bird/day.
  • Water 1.8–3× feed by weight depending on climate.
  • Max ventilation 3–5 m³/h per kg live weight; 50" fan ≈ 40,000 m³/h at 1.1 kW.
  • Cooling pad face velocity 1.8 m/s; silos hold 5 days' peak feed.
  • Farm CAPEX uses the same per-bird bands and regional factors as our Farm Cost Calculator (broiler 16, layer 26, breeder 42 USD/place).
  • Feed mill, hatchery, processing and cold storage are sized only — they are not priced.

Detailed tools: farm cost, ventilation, water, hatchery capacity.

Next steps before a request

Questions

What does the integrated poultry project calculator estimate?

It sizes a complete commercial poultry project from your bird capacity: number of houses, birds per house, feed, water, ventilation, cooling pads, silos, standby generator and annual production, plus feed mill, hatchery, processing and cold storage capacity when selected. It also gives an indicative farm CAPEX band. Every figure is a planning estimate, not a quotation.

Are the results a price quote?

No. The farm CAPEX band uses the same published per-bird assumptions as our Farm Cost Calculator with a ±30% planning range. Feed mill, hatchery, processing and cold storage are sized but not priced. Real prices come only from supplier quotations against a written scope.

Which standards are the sizing figures based on?

Common published planning figures: stocking densities from breed guides and EU welfare rules, feed and water ratios from breed management guides, and tunnel-ventilation practice of 3–5 m³/h per kg live weight with 1.8 m/s pad face velocity. Your engineer should confirm them for your site.

Does HatchMatch build the project?

No. HatchMatch is supplier-neutral and never executes projects. We help you define scope and introduce independent turnkey/EPC partners or multiple suppliers so you can compare comparable quotes. Free for buyers.

How we calculated

How we calculated

The result follows the formulas and planning assumptions below. Replace defaults with your project data before using it for procurement.

No credit decision, pre-approval, offer, underwriting or guarantee. Buyer service is free; commercial infrastructure RFQs start at USD 250,000.

Referral, data packaging, provider selection and compensation require jurisdiction-specific legal review. No provider availability or regulatory exemption is confirmed.

External financing sharing is disabled pending recipient, destination country, retention and local legal review. Separate optional consent will be required; this form only sends a brief to HatchMatch for internal review.

Illustrative scenario only. Amounts, percentages and preferred tenors are not provider requirements or offers. Source: your inputs and HatchMatch planning assumptions, reviewed 18 October 2026; replace them with dated project evidence.

  1. birds per house = 120 m × 15 m × planning density (broilers 16, layers 25, breeders 5 birds/m²); houses = bird places ÷ birds per house, rounded up
  2. feed: broilers = places × 2.4 kg × FCR 1.65 × cycles per year (peak 0.2 kg/bird/day); layers 115 g and breeders 160 g per bird per day × 365
  3. peak water = peak feed × 3 (hot), 2 (temperate) or 1.8 (cold); maximum airflow per house = birds per house × live weight × 5, 4 or 3 m³/h per kg
  4. fans per house = airflow ÷ 40,000 m³/h; cooling pad area = airflow ÷ (1.8 m/s × 3,600), none for cold climates; 2 silos per house for 5 days of peak feed
  5. standby generator kVA = fan kW (1.1 kW per fan) × 1.25 for other loads ÷ 0.8 power factor × 1.25 margin, rounded up to 50 kVA
  6. farm CAPEX comes from the farm cost calculator's own engine: places × per-place band × regional factor plus freight and duty (10%), site works (8%) and owner's cost (5%, or 7% for high automation), shown with its ±30% planning range

Limits

  • Fixed 120 × 15 m houses and published planning ratios, not a site design. Feed mill, hatchery, processing and cold storage are sized only, never priced.

Editorial responsibility: HatchMatch Group Sourcing Desk. Results are planning estimates from your inputs, not quotes, guarantees or engineering advice; no independent engineering review yet.

See the full formulas, assumptions and sources
Get a Free QuoteExplore Financing