Commercial Poultry Farm Projects in Mexico
Retrofit, automation and CAPEX/ROI planning where local suppliers are already strong.
Direct answer
A 100,000-bird automated broiler project in Mexico needs about 4 houses of 25,000 birds (14 m × 123 m each, 6,897 m² total), roughly 2,375 t of feed per year, 92.7 m³ of water per peak day, and an indicative CAPEX of $1.04M – $1.80M. Design conditions used: 38 °C dry-bulb, 22 °C wet-bulb, 5 °C winter minimum.
- — Mature market — compete on project planning and financing, not on equipment listings.
- — Regional climates differ widely; site-level design matters more than country defaults.
Plan your Mexico project
Where is the project located?
Country changes the climate design, cost index and equipment scope.
Next steps
Mexico poultry project FAQ
Indicative CAPEX is $1.04M – $1.80M for an automated closed-house project, about $10.4–$18.1 per bird including a 0.95 landed-cost index for Mexico. Land, permits, working capital and live birds are excluded. Class-4 estimate, ±30%.
About 4 houses of roughly 25,000 birds each, sized at 14 m × 123 m (1,724 m² per house, 6,897 m² total) at the density this climate supports.
Low humidity (38 °C dry-bulb, 22 °C wet-bulb) makes evaporative cooling highly effective — 15 cm pads sized correctly are usually the single most valuable climate investment.
About 2,375 tonnes of feed per year and 92.7 m³ of water per peak day including cooling demand. Feed storage should cover 5 days of peak consumption.
Grid reliability here is rated good. A generator remains essential for a closed house — ventilation failure becomes life-threatening within minutes.
Qualified commercial projects can be introduced to independent third-party financing partners. Financing is subject to their approval — HatchMatch does not provide credit and does not guarantee approval.