Commercial Poultry Farm Projects in Kenya
Commercial broiler and layer expansion with feed, water and power reliability at the centre.
Direct answer
A 100,000-bird automated broiler project in Kenya needs about 4 houses of 25,000 birds (14 m × 132 m each, 7,407 m² total), roughly 2,375 t of feed per year, 35.5 m³ of water per peak day, and an indicative CAPEX of $1.26M – $2.19M. Design conditions used: 31 °C dry-bulb, 22 °C wet-bulb, 12 °C winter minimum.
- — Highland sites are mild — full tunnel cooling is often unnecessary above 1,800 m.
- — Solar for pumps, lighting and controllers has a real payback here.
- — Feed cost volatility dominates the ROI sensitivity.
Plan your Kenya project
Where is the project located?
Country changes the climate design, cost index and equipment scope.
Next steps
Kenya poultry project FAQ
Indicative CAPEX is $1.26M – $2.19M for an automated closed-house project, about $12.6–$21.8 per bird including a 1.15 landed-cost index for Kenya. Land, permits, working capital and live birds are excluded. Class-4 estimate, ±30%.
About 4 houses of roughly 25,000 birds each, sized at 14 m × 132 m (1,852 m² per house, 7,407 m² total) at the density this climate supports.
With 31 °C dry-bulb against 22 °C wet-bulb, evaporative cooling delivers only a limited temperature drop. Air velocity over the birds, inlet control and litter moisture management carry most of the work.
About 2,375 tonnes of feed per year and 35.5 m³ of water per peak day including cooling demand. Feed storage should cover 5 days of peak consumption.
Grid reliability here is rated fair. Assume the farm runs on generator for a material share of the year and budget fuel accordingly; solar can offset lighting, pumps and controllers but never replaces backup power.
Qualified commercial projects can be introduced to independent third-party financing partners. Financing is subject to their approval — HatchMatch does not provide credit and does not guarantee approval.