Controlled housing built around humidity, power and input volatility
Commercial broiler and layer expansion works best when ventilation, generator duty and feed storage are planned together rather than bought as separate packages.
What decides the purchase
Very high wet-bulb restricts pad cooling, and interruptions to power, feed or chick supply can erase the benefit of higher automation.
Put this in the RFQ
State working air speed, inlet design, generator load, fuel autonomy, feed-storage days, drainage and the supplier’s local commissioning plan.
Direct answer
A 100,000-bird automated broiler project in Bangladesh needs about 4 houses of 25,000 birds (14 m × 132 m each, 7,407 m² total), roughly 2,375 t of feed per year, 35.5 m³ of water per peak day, and an indicative CAPEX of $1.10M – $1.90M. Design conditions used: 36 °C dry-bulb, 29 °C wet-bulb, 11 °C winter minimum.
- — Very high wet-bulb — air speed and inlet control do the cooling work; pads add little.
- — Grid interruptions require generator backup sized for full tunnel load.
- — Feed and day-old chick cost volatility dominates ROI sensitivity.
Model the Bangladesh project scope
Where is the project located?
Country changes the climate design, cost index and equipment scope.
Next steps
- Full commercial farm planner
- Open → closed house conversion
- Ventilation calculator
- Cooling pad calculator
- Feed consumption calculator
- Water consumption calculator
- Poultry project financing
- Request a turnkey proposal
- Documented public project: Suguna multi-country poultry expansion — independent record; HatchMatch was not involved
