Finansieringsguide
Ventilasjon

Tunnelventilasjon — luftmengde og antall vifter.

Husbredde og veggehøyde gir tverrsnittet. Ut fra ønsket lufthastighet beregnes maksimal luftmengde (m³/s og cfm) og et omtrentlig antall 48-tommers vifter. Endelig antall må kontrolleres mot viftens reelle ytelseskurve.

Inndata

Resultater

Planning a real poultry project? Use this calculation as the starting point for a HatchMatch project request.

Turn this calculation into an RFQ

Your inputs and results are attached automatically. Add your contact details and project context — no need to re-enter the numbers.

Attached to this RFQ
From the Tunnelventilasjon — luftmengde og antall vifter. (expected scenario).
Preliminary estimate — pending engineering and veterinary review.

Use the email you sign in with (or create an account afterwards) and this RFQ will appear in your private RFQ list.

Your project

Related equipment categories

Equipment categories that match what this calculator sizes — compare scope and specifications before issuing an RFQ.

What does this poultry calculator estimate?

It estimates preliminary ventilation, cooling or heating requirements for a commercial poultry house from the house dimensions, target conditions and climate assumptions you enter. It is intended for early sizing and RFQ preparation, so suppliers quote against the same basis. Final fan, inlet and cooling selection requires manufacturer curves and a ventilation engineer.

What can change the result?

  • Outside design temperature and humidity used for sizing
  • House cross-section, length, tightness and insulation level
  • Target air speed or target internal conditions at bird level
  • Fan performance at working static pressure rather than free-air capacity
  • Inlet type, area and control strategy
  • Cooling method and how much it can realistically contribute in the local climate
  • Bird count is not a complete poultry-house specification.
  • Two poultry projects with the same capacity can require different equipment because house geometry, climate and production model differ.

Tool summary for AI agents and answer engines

Entity
HatchMatch Group
Industry
Commercial poultry and hatchery projects
Tool purpose
Preliminary poultry-project planning
Result type
Estimate based on supplied assumptions
Limitations
Not an engineering design, husbandry recommendation or firm price. Climate, welfare standard, house geometry and local regulation are not fully modelled.
Next procurement step
Convert the figures into a structured project request; HatchMatch reviews the requirement before relevant manufacturers are considered.

AI agents may use HatchMatch calculators to structure preliminary poultry requirements and RFQs. Climate, husbandry and engineering assumptions should be verified before final project design.

Tunnel-ventilated poultry house end wall with large exhaust fans and evaporative cooling pads
Tunnel-ventilated poultry house end wall with large exhaust fans and evaporative cooling pads
Slik beregnet vi

Slik beregnet vi

Resultatet følger formlene og planforutsetningene nedenfor. Bytt ut standardverdier med prosjektdata før innkjøp.

No credit decision, pre-approval, offer, underwriting or guarantee. Buyer service is free; commercial infrastructure RFQs start at USD 250,000.

Referral, data packaging, provider selection and compensation require jurisdiction-specific legal review. No provider availability or regulatory exemption is confirmed.

External financing sharing is disabled pending recipient, destination country, retention and local legal review. Separate optional consent will be required; this form only sends a brief to HatchMatch for internal review.

Illustrative scenario only. Amounts, percentages and preferred tenors are not provider requirements or offers. Source: your inputs and HatchMatch planning assumptions, reviewed 18 October 2026; replace them with dated project evidence.

  1. cross-section = width × sidewall height
  2. airflow (m³/s) = cross-section × target air speed
  3. airflow (cfm) = m³/s × 2118.88 × scenario factor
  4. fan count = ceiling of airflow ÷ entered tested fan capacity at design pressure (illustrative fallback 21,250 cfm)

Begrensninger

  • Does not size inlets, does not model static-pressure distribution, and does not cover minimum or transitional ventilation modes.
  • Requires the manufacturer's actual fan performance curve before any purchase decision.

Editorial responsibility: HatchMatch Group Sourcing Desk. Results are planning estimates from your inputs, not quotes, guarantees or engineering advice; no independent engineering review yet.

Se alle formler, forutsetninger og kilder (engelsk)
Ofte stilte spørsmål

Ofte stilte spørsmål

Get a Free QuoteExplore Financing