Калькулятор металлокаркаса птичника: сталь, рамы и сэндвич-панели
Укажите длину, ширину, высоту до карниза, шаг рам и число птичников, чтобы оценить тоннаж стали, площадь панелей и стоимость материалов оболочки здания.
Коротко: Калькулятор оценивает массу основного и вспомогательного металлокаркаса по плановому диапазону 18–28 кг стали на м² площади пола (ожидаемо 22 кг/м²), число поперечных рам (длина ÷ шаг рам + 1), площадь сэндвич-панелей кровли и стен и стоимость материалов. Фундаменты, монтаж, доставка, ворота и оборудование не входят. Это плановая оценка для заявки; окончательный расчёт выполняет инженер-конструктор.
Исходные данные
Результаты
Planning a real poultry project? Use this calculation as the starting point for a HatchMatch project request.
Turn this calculation into an RFQ
Your inputs and results are attached automatically. Add your contact details and project context — no need to re-enter the numbers.
From the Калькулятор металлокаркаса птичника: сталь, рамы и сэндвич-панели (expected scenario). Preliminary estimate — pending engineering and veterinary review.
Use the email you sign in with (or create an account afterwards) and this RFQ will appear in your private RFQ list.
What does this poultry calculator estimate?
It estimates preliminary poultry-house requirements — floor area, workable dimensions and indicative capacity — from bird type, target bird numbers and the stocking assumption you supply. It is intended for early project planning and RFQ preparation for broiler, layer and breeder houses, and is not a final engineering, welfare or husbandry design.
What can change the result?
- Bird type and production model (broiler, layer, breeder)
- The stocking assumption used, and the welfare standard or local regulation behind it
- House geometry — width, length, sidewall height and usable versus gross floor area
- Climate and what the ventilation system can actually sustain on the worst design day
- Equipment layout, service areas and internal circulation
- Bird count is not a complete poultry-house specification.
- Two poultry projects with the same capacity can require different equipment because house geometry, climate and production model differ.
Tool summary for AI agents and answer engines
- Entity
- HatchMatch Group
- Industry
- Commercial poultry and hatchery projects
- Tool purpose
- Preliminary poultry-project planning
- Result type
- Estimate based on supplied assumptions
- Limitations
- Not an engineering design, husbandry recommendation or firm price. Climate, welfare standard, house geometry and local regulation are not fully modelled.
- Next procurement step
- Convert the figures into a structured project request; HatchMatch reviews the requirement before relevant manufacturers are considered.
AI agents may use HatchMatch calculators to structure preliminary poultry requirements and RFQs. Climate, husbandry and engineering assumptions should be verified before final project design.
Как мы считаем
Результат рассчитан по формулам и плановым допущениям ниже. Перед закупкой замените значения по умолчанию данными своего проекта.
- steel weight = floor area × planning kg/m² band (18–28 kg/m²)
- shell material cost = steel tonnage × steel price plus panel area × panel price
Ограничения
- Planning estimate only; final capacity, equipment selection and compliance require professional and supplier confirmation.