Project calculator
Poultry project cost calculator — from bird type and climate to a CAPEX and OPEX estimate
Four guided steps: choose the bird type, set standing capacity, describe the site climate, then lay out the houses. You get a turnkey CAPEX band, cost per bird place, an annual operating cost estimate and a density check on your layout. Class-4 planning accuracy (±30%) — use it to size the project before you ask suppliers for prices.
What can change the result?
- Local civil and labour cost, and whether equipment is made locally or imported with freight and duty.
- Climate specification — evaporative cooling, insulation level and installed fan capacity.
- House geometry: fewer, larger houses generally reduce cost per bird place.
- Automation depth, from manual systems to full sensor-based control.
- Feed price and feed conversion, which dominate the operating cost of any meat or egg project.
Frequently asked questions
It walks through four decisions — bird type, standing capacity, site climate and house layout — and returns a Class-4 planning band (±30%) for turnkey CAPEX plus indicative annual OPEX. It is a scoping tool, not an engineering study or a quotation.
Broiler, cage layer, cage-free / aviary layer, breeder and hatchery (bird-place equivalents). Each carries its own per-bird CAPEX band and operating cost profile.
Hot and humid sites need evaporative cooling, higher fan counts and heavier insulation, which raises CAPEX per bird place and increases annual energy cost. Cold sites shift the premium from cooling to heating fuel and envelope insulation.
House count, span and stocking density set how much structure, ventilation equipment and floor area you buy for the same number of birds. Fewer, wider houses usually lower cost per bird place; many small houses raise it.
Land purchase, permits and environmental studies, working capital, day-old chicks and first feed, feed mill / processing units, interest during construction and FX hedging.
No. It covers feed, day-old birds, labour, energy, water, health and maintenance at planning level. Financing cost, depreciation, tax and marketing are not included.
Use it to frame the size of the ask. Lenders expect supplier quotes on a fixed scope, drawings and a cash-flow model before they underwrite.
No. HatchMatch is an independent sourcing platform — not a manufacturer, EPC contractor or lender. We help you turn this estimate into a comparable RFQ and review it manually before any supplier introduction.